Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Lawrence Homeowners
When a torsion spring snaps, the door stops dead, and no amount of tugging on the opener remote will change that. We repair garage door springs in Lawrence, and it’s the call we get most often. A broken spring leaves a door too heavy for the opener to lift and too dangerous to force. Our technicians have up to 10 years of experience with torsion and extension springs on the brands Lawrence homes actually have, including Clopay, Amarr, and Wayne Dalton. We aim to get out the same day, diagnose the spring, and quote a price before anything is touched.
Lawrence’s older housing stock and cold winters put real stress on springs. Doors that sit in unheated garages through a Massachusetts freeze cycle cycle through thousands of tension changes a year, and steel fatigues. We see plenty of snapped springs on Lawrence doors in the days after a hard cold snap. If your door won’t lift or you heard a loud bang from the garage, call (855) 761-3321. Estimates are free, and we quote and agree on the price before any work starts.
We’re a repair specialist. That means we diagnose your spring, your opener, and your door before we recommend anything, and we fix what’s broken rather than pitching a full replacement. If a single spring or a matched pair is the problem, that’s what we address.
What Our Garage Door Spring Repair Service Includes
Spring repair isn’t one job. Torsion and extension systems fail in different ways, and each needs its own approach. Here’s what we cover on a Lawrence spring call.
Torsion Spring Replacement
A torsion spring is the coiled steel mounted on the shaft above your door. It stores the energy that counterbalances the door’s weight, and when it breaks, the door becomes almost impossible to lift by hand. You need torsion spring replacement when the door feels dead heavy, you heard a sharp snap, or you can see a visible gap in the coil. We measure the wire gauge, inside diameter, and length of the existing spring, wind the new one to the correct tension for your door’s weight, and test the balance before we leave. A torsion spring is under extreme tension, and adjusting one by hand is a genuine injury risk. That’s why this is a trained-technician job, not a homeowner one.

Extension Spring Replacement
Extension springs run along the sides of the door on older track systems, stretching as the door closes and contracting as it opens. They fail when the coil stretches past its limit or the hook end fatigues, and a broken extension spring can whip loose if the safety cable isn’t in place. We replace extension springs in matched pairs so the door lifts evenly, and we check the cables and pulleys while we’re in there. If you have an older Lawrence door running extension springs, this is one of the most common repairs we handle.

Broken Spring Repair
Broken spring repair means diagnosing exactly which spring failed, why, and whether the opposite spring is close behind. A snapped spring often takes the door out of balance and can leave it stuck halfway. We don’t just swap the broken one and go. We check the whole spring system so you’re not calling us back a month later for the twin. If the door is stuck open or won’t close, we treat it as a priority call and get a technician out as quickly as we can.

Spring Adjustment
Spring adjustment is for the door that still works but feels wrong. It slams down, drifts up, or won’t stay at half height. That usually means the spring tension has drifted or the springs were wound incorrectly at some point. We set the tension to match the door’s actual weight so it moves smoothly and the opener isn’t fighting it. Left alone, an out-of-balance door wears out the opener and the rollers faster, so adjustment is often the cheaper repair in the long run.
Safety Cable Installation
Safety cables run through the center of extension springs and catch the spring if it breaks, keeping it from flying across the garage. Older doors sometimes have no cables at all, or cables that are rusted or loose. We install and secure safety cables as part of extension spring work, and we check them on any spring call. It’s a small part of the job with a big role in keeping your garage safe.
Spring Inspection
Spring inspection is a full look at the torsion or extension system, the cables, the drums, and the door balance. We check for wire separation, rust, uneven winding, and the telltale sag that says a spring is near the end of its life. It’s worth doing if your door is older, noisy, or has never had the springs checked. Catching a fatigued spring before it snaps saves you a stuck door and usually a bigger repair bill.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on the equipment that’s already in your garage. Clopay doors are common on Lawrence homes, and their spring systems vary by model and door weight, so matching spring specs matters. Amarr builds doors with specific spring configurations too, and we know where those springs wear and how to source the right replacement. Wayne Dalton doors sometimes use proprietary spring setups, and we’ve worked on enough of them to know which ones need a matched replacement rather than a generic spring.
Craftsman openers are everywhere in this area, and while Craftsman doesn’t make the springs, the opener and the spring work together. When a spring is out of balance, a Craftsman opener takes the strain and can burn out its logic board or strip a gear. We look at both so you’re fixing the real problem. Whether you have Clopay, Amarr, Wayne Dalton, Craftsman, or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. A snapping torsion spring sounds like a gunshot. If you heard it and the door won’t lift, the spring has likely failed. Don’t keep running the opener, since it’ll strain the motor against a door it can’t move.
- The door feels extremely heavy. If lifting the door by hand takes real effort, the spring is no longer counterbalancing the weight. Stop lifting it and call us. Forcing a heavy door can bend tracks or drop the door.
- A visible gap in the spring coil. A torsion spring with a gap or a separated coil is broken, even if the door still moves a little. The door is running on borrowed time and can fail fully without warning.
- The door is crooked or slams shut. An uneven lift or a door that drops hard points to spring tension that’s off or a spring that’s failing. This wears the opener and rollers and needs attention before something else breaks.
- The opener strains or the door won’t stay up. If the opener labors, or the door drifts back down when you let go, the spring system is out of balance. It’s often a spring adjustment rather than a full replacement.
Our Garage Door Spring Repair Process – Step by Step
- 1
Diagnose the symptom you describe. We start with what you’re seeing: a stuck door, a bang, a heavy lift. On arrival we confirm whether it’s a torsion or extension system and inspect the full spring assembly before touching anything.
- 2
Measure and match the spring. We measure wire gauge, inside diameter, and length so the replacement matches your door’s weight. A wrong-gauge spring will fail early or leave the door out of balance, which is why we don’t guess.
- 3
Quote the price before work begins. We tell you what the repair involves and the estimated cost, and you agree to it before we start. No surprise invoice after the fact.
- 4
Replace and wind to spec. We install the new spring (or matched pair for torsion and extension systems), wind it to the correct tension using proper winding bars, and secure the safety cables. This is the part that requires training and the right tools.
- 5
Test balance and cycle the door. We run the door through several open-close cycles, check the balance, and confirm the opener isn’t straining. You get a door that lifts smoothly and a clear idea of what we found.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Lawrence?
Spring repair in Lawrence typically runs $180 – $340 for one spring, depending on the spring type and your door. That’s the price for a single spring. A matched pair is usually replaced together because both springs wear at the same rate, so a pair runs about twice that range. A simple spring adjustment or safety cable install sits toward the lower end; a torsion replacement on a heavier door sits toward the upper end.
What moves the price: whether it’s torsion or extension, whether you replace one spring or a matched pair, door weight, and whether the cables or drums need attention too. To avoid overpaying, get the quote in writing before work starts and ask whether both springs are being replaced. A good repair includes the diagnostic, the spring, and the balance test.
| Repair | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Matched pair (about twice one spring) | ≈ $360 – $680 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Track Realignment | $120 – $240 |
These are typical estimates, not final figures. The written estimate sets the final price, and we quote and agree on it before any work starts. If you also need opener work, garage door spring repair and opener repair can often be handled on the same visit. Call (855) 761-3321 for a free estimate.
Garage Door Spring Repair Near Lawrence – Our Service Area
We handle spring repair across Lawrence and the surrounding towns, including Methuen Town, Andover, North Andover, Tewksbury, Groveland, North Reading, Wilmington, Middleton, and Billerica. Closer towns usually get the fastest response, and we aim for same-day service when a spring has snapped. If you’re in a neighboring town, we can also help with garage door spring repair and garage door spring repair in those areas. Call to confirm timing for your address.
Serving Lawrence, MA – Our Local Coverage Area
We serve Lawrence and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Lawrence
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that counterbalance your door’s weight. Without working springs, the door is too heavy for the opener to lift safely. The repair restores balance so the door moves smoothly and the opener isn’t strained. We diagnose the spring system first, then quote before starting.
Most spring repairs take about an hour to a couple of hours, depending on whether it’s torsion or extension and whether one or both springs are replaced. A matched pair takes longer than a single spring. We test the door through several cycles before we leave. Call (855) 761-3321 to get a sense of timing for your door.
Spring repair in Lawrence typically runs $180 – $340 for one spring, and a matched pair runs about twice that range. Cable repairs and adjustments sit on the lower end, and heavier doors sit toward the upper end. The written estimate sets the final price, and we agree on it before any work starts. Call (855) 761-3321 for an exact quote; estimates are free.
Yes. We work on Clopay, Amarr, Wayne Dalton, and Craftsman doors and openers, along with LiftMaster, Chamberlain, Genie, and Raynor. That means we match the right spring spec to your door rather than guessing. Whatever brand is in your garage, we can diagnose it. Call and tell us the make so we can come prepared.
In most cases, yes. A snapped spring is a priority call, and we aim to get a technician out the same day in Lawrence and nearby towns. We quote the price before work starts so there are no surprises. Call (855) 761-3321 as soon as it happens and we’ll get you on the schedule.
Warranty terms depend on the spring and the repair, so we explain exactly what’s covered before you agree to the work. We stand behind the repair and the parts we install. Ask us about the specific coverage when we quote. Call (855) 761-3321 and we’ll walk you through it.
Clear the area around the door and the garage floor so we have room to work. Don’t try to force the door open or run the opener on a broken spring, since that can cause more damage or injury. Have the door’s make and any recent symptoms ready, and note whether you heard a bang. We’ll bring the tools and take it from there.
Schedule Your Garage Door Spring Repair Service in Lawrence Today
A broken spring leaves your garage door stuck and your day on hold. Lawrence Garage Door Repair Pros diagnoses the spring, quotes the price before work starts, and gets your door moving again. Our technicians have up to 10 years of experience, we aim for same-day service, and estimates are free. Call (855) 761-3321 for a no-obligation estimate and we’ll get your door back in service. For related repairs, see Lawrence Garage Door Repair Pros for the full picture.
Written by the team at Lawrence Garage Door Repair Pros.