Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Lawrence?
Panel replacement in Lawrence typically costs between $250 and $500 for a standard residential sectional door, with most single-panel jobs landing in the $300 to $400 range. The price moves with the panel type, whether the section is insulated, and the color match to the rest of the door. A written estimate sets the final price before any work begins.
A dented or rusted section doesn’t mean you need a whole new door. When the springs, cables, tracks, and opener are still doing their job, swapping one or two panels puts the door back in service and leaves the rest of the system alone. That’s the repair-first approach we take on every call in Lawrence. For a deeper look at how a single section gets matched and fitted, see our page on panel replacement.
Key Takeaways
- Typical panel replacement in Lawrence runs $250 to $500 for a standard residential door.
- Insulated and steel-backed panels sit at the top of that range; basic 24-gauge steel panels sit near the bottom.
- Labor, color matching, and whether the section is a top, middle, or bottom panel all move the number.
- Replacing a panel costs far less than a new door ($700 to $2200), so repair comes first whenever the structure allows it.
- Estimates are free. Call (855) 761-3321 and we’ll tell you what the job looks like.
Panel Replacement Cost Breakdown (2026)
Here’s how the line items usually break down for a Lawrence garage door panel job. These are typical estimated ranges for the local market, not a final quote. The written estimate you get on site is the price that stands.
| Line item | Typical estimated range |
|---|---|
| Single standard steel panel (24-gauge, no insulation) | $250 – $350 |
| Single insulated panel (foam-core or steel-backed) | $320 – $500 |
| Two-panel job | $450 – $850 |
| Labor for panel removal and refit | $120 – $220 |
| Color matching and custom order fee | $40 – $120 |
| Related cable or roller service while we’re in the door | $110 – $250 |
| Track realignment if the panel was knocked out of the door | $120 – $240 |
For context on the wider market: a full garage door repair call in Lawrence runs $150 to $600, and a brand-new door installation is $700 to $2200. Panel replacement sits in the middle, which is why we recommend it whenever the rest of the door is sound. If a spring or cable is also worn, those are separate line items: spring repair is $180 to $340 for one spring, and cable repair is $130 to $250.
What pushes the price up: odd panel widths that need a custom order, textured or woodgrain finishes, and doors where the panel is part of a matched set with a specific profile. What pulls it down: a common 16-by-7 foot door in a standard color that we can source without a special order, and a job where only one section is damaged and the hardware around it is fine.
What Affects Panel Replacement Pricing in Lawrence
- Panel type and insulation. A basic non-insulated steel panel costs less than a foam-core or steel-backed insulated panel. Insulated panels are common on homes where the garage sits under a bedroom or shares a wall with living space, and lots of Lawrence triple-deckers and two-families have that layout. The insulation adds cost but also helps hold heat in the garage during a cold Massachusetts winter.
- Top, middle, or bottom section. Bottom panels take the most abuse. They see snow, road grit, and the brunt of a car bumper, so they get replaced more often. Top panels carry the torsion hardware and are usually a straight swap once the spring tension is released. Middle sections sit between the two.
- Panel dimensions and profile. Standard 21-inch and 24-inch panel heights are widely available. Odd sizes, short panels on a low-headroom door, and long panels on a wide door can require a custom order, which adds time and money.
- Color and finish matching. If your door is white, almond, or sandstone, matching is easy. A woodgrain or custom color may need a special order so the new section blends with the rest of the door.
- Condition of the surrounding system. A panel rarely fails alone. If the door came off-track, the cables and rollers may need attention too. Track realignment runs $120 to $240 and roller replacement is $110 to $220. Catching these at the same time avoids a second call-out.
- Brand. We work on all the major residential brands, including Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, and Craftsman. Some brands have panel profiles that are easier to source than others, and knowing which is which saves time on the order and on the fit.
How to Save on Panel Replacement
There are a few practical ways to keep a panel job from running past the low end of the range.
- Get the whole door checked, not just the panel. A free estimate that includes the springs, cables, tracks, and opener tells you whether a second visit is coming. Fixing a worn roller or a cable at the same time as the panel usually costs less than calling us back separately. A full garage door repair call is $150 to $600, so bundling saves on the visit.
- Stick with a standard color if you can. White, almond, and common tans match without a custom order. If the panel is on the side of the house that gets less sun, a near-match is hard to spot from the street.
- Replace only the damaged section. We don’t push a full door when one panel will do. If a top or middle panel is dented and the bottom is fine, one panel is the answer.
- Ask about the panel warranty before you order. Some manufacturers cover the panel finish and the structural integrity separately, and knowing what’s covered helps you decide between a like-for-like swap and a small upgrade.
- Catch track damage early. A door that’s been nudged off-track wears the panel edges and the rollers. Realigning the track at $120 to $240 now prevents a bigger panel and hardware job later.
Every estimate from us is free, and we’ll tell you plainly whether a panel swap is the right call or whether something else in the door needs attention first. Call (855) 761-3321 to book a look.
When Panel Replacement Beats a New Door
Panel replacement is the right call when the door’s structure and hardware are in good shape. The springs hold tension, the cables aren’t frayed, the tracks are straight, and the opener’s logic board and travel limits are working. A dented, rusted, or hail-damaged section is the only real problem, so one panel brings the door back to full function.
A new door makes more sense when several panels are damaged, the door is out of square, the spring system is at the end of its life and the panels are showing their age, or the door no longer matches the opening. Even then, the math matters. A new door installation is $700 to $2200, which is several times the cost of a $250 to $500 panel job. Before you replace, ask whether the rest of the door would fail a close inspection. Our technicians have up to 10 years of experience and have seen enough doors to answer that honestly.
If you’re deciding between a repair and a replacement, the fastest way through it is a free estimate. Call (855) 761-3321 and we’ll walk the door with you.
What’s Included in a Panel Replacement Estimate
A clear estimate for panel replacement in Lawrence should list every part and every step, so you’re not surprised when the invoice arrives. Here’s what we put in writing before any work starts.
- The panel itself, with brand, profile, and color named.
- Hardware: hinges, rollers, and any fasteners that come off during the swap.
- Labor for releasing spring tension safely, removing the old section, and fitting the new one.
- Re-tensioning the springs after the new panel is in place.
- A test cycle of the full door and opener to confirm travel limits and balance.
- Any track, cable, or roller work we recommend at the same time, priced separately.
Spring work is not a DIY job. Torsion springs and cables are under high tension and can cause serious injury if released without the right tools and training. We handle that part with proper winding bars and a controlled release, so the panel swap is safe from start to finish. The same goes for electrical work on the opener. Leave the wiring to a trained technician.
How long does panel replacement take in Lawrence?
A single-panel replacement in Lawrence usually takes one to two hours once the panel is on site. A two-panel job runs two to three hours. The bigger variable is the order: if the panel has to be custom-ordered, the wait is typically a few days, and the install itself is still a same-visit job once it arrives.
FAQs – Panel Replacement Cost
How much does garage door panel replacement cost in Lawrence?
Panel replacement in Lawrence typically costs $250 to $500 for a standard residential door, with most jobs landing around $300 to $400. Insulated panels and custom colors push toward the top of that range, while a single standard steel panel in a common color sits near the bottom. Call (855) 761-3321 for a free estimate on your specific door.
Is it cheaper to repair a panel or replace the whole door?
Repairing a panel is almost always cheaper. A panel job at $250 to $500 is a fraction of a new door installation at $700 to $2200, and it keeps the rest of the door and opener in service. Unless the door is out of square or several sections are damaged, a panel swap is the lower-cost, lower-disruption choice. Call (855) 761-3321 and we’ll tell you which one your door needs.
Can you replace just one panel on a garage door?
Yes. A single panel can be replaced on most sectional doors as long as the profile and color can be matched to the rest of the door. The springs are released, the old section comes out, the new one goes in, and the door is tested and balanced. One panel typically runs $250 to $350 for standard steel. Call (855) 761-3321 to check whether your panel can be sourced.
Does panel replacement cost more for an insulated door?
Yes, insulated panels typically cost $320 to $500 installed versus $250 to $350 for standard non-insulated steel. The gap covers the foam core or steel backing and the slightly heavier fit. Insulated panels are worth the money on doors that share a wall with living space, which is common in Lawrence’s older multifamily homes. Call (855) 761-3321 for a quote that fits your door.
Can you come today for a damaged panel?
Often yes. We offer same-day service for panel jobs where the panel is in stock locally, with fast dispatch from 7am to 7pm. If the panel has to be ordered, we’ll book the install for the first available slot after it arrives. Call (855) 761-3321 and we’ll tell you what’s realistic for your door.
Why Choose Us for Panel Replacement in Lawrence
We fix garage doors for a living, and only garage doors. That focus shows up in the panel work: we know the profile and color codes for Clopay, Amarr, Wayne Dalton, Raynor, and the other major brands, so the order is right the first time and the fit is clean. We work on the opener brands too, including LiftMaster, Chamberlain, Genie, and Craftsman, so a Wi-Fi opener that’s out of adjustment gets sorted in the same visit.
We’re not a general contractor or a handyman with a side hustle. Every technician who shows up works on doors and openers as their trade, with up to 10 years of experience on the bench. We recommend a repair first, and we don’t push a full replacement when a panel swap will do the job. Free estimates, upfront pricing, and a satisfaction guarantee on the work. Lawrence Garage Door Repair Pros is who to call when a panel needs to come out and a new one needs to go in.
Book a Free Panel Replacement Estimate
A dented panel is a real disruption. The door doesn’t seal right, the opener strains, and the garage stops being the secure storage space you expect it to be. The fix is usually a same-visit panel swap, priced at $250 to $500 for a typical Lawrence door. Call (855) 761-3321 today for a free estimate. We’ll look at the panel, check the springs and tracks, and give you a written number before any work starts.
Pricing reflects the Lawrence market as of 2026. Lawrence Garage Door Repair Pros offers free estimates – call (855) 761-3321.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Sofia Hernandez"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Erin Schaefer"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Kurt Thompson