Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Lawrence?
Spring repair in Lawrence typically costs $180 – $340 for one spring, and that’s the price we quote most often when a torsion or extension spring snaps. Most homes run a matched pair of springs, so replacing both usually lands near double that range. The written estimate we give you after we look at the door sets the final price, and there’s no charge for that estimate.
A dead spring means a door that won’t lift, or one that drops hard the moment you let go of the handle. That’s a genuine safety problem, not a nuisance, and it’s why we treat spring work as its own specialty rather than a side job. Our technicians have up to 10 years of experience with torsion springs, extension springs, and the cables and drums that work alongside them. When you call (855) 761-3321, we’ll get you a free estimate and aim to have you back in service today.
Key Takeaways
- One spring: $180 – $340 typical. A matched pair usually runs about twice that, since both springs are normally changed together.
- Spring work is high-tension work. A wound torsion spring stores enough force to cause serious injury, so this isn’t a DIY repair.
- We repair springs on the brands Lawrence homeowners already own: Clopay, Amarr, Wayne Dalton, Raynor, and more.
- Free estimates, upfront pricing, and same-day service are the standard, not an add-on.
- Repair comes first. If a spring swap gets the door working again, we won’t push a new door on you.
Spring Replacement Cost Breakdown (2026)
Here’s what the pieces of a spring job typically run in Lawrence. These are estimated ranges for the 2026 market; your written estimate is what actually governs the price.
| Line Item | Typical Estimated Range |
|---|---|
| Single torsion or extension spring replacement | $180 – $340 |
| Matched pair (both springs, standard practice) | About double the single-spring range |
| Cable repair (often needed once a spring fails) | $130 – $250 |
| Track realignment (door knocked off line by the failure) | $120 – $240 |
| Roller replacement (worn rollers found during the job) | $110 – $220 |
| Opener repair (if the motor was strained by the stuck door) | $120 – $320 |
| General garage door repair (broader fixes) | $150 – $600 |
| New door installation (only if the door itself is beyond repair) | $700 – $2,200 |
The single biggest driver of the total is whether one spring or both need replacing. Springs are wound to work as a set, and a new spring paired with an old one wears unevenly and fails sooner, so we almost always recommend the pair. Beyond that, what pushes the price up is condition: a snapped spring that whipped a cable loose, a door that jumped its track when it dropped, or an opener that burned out its gear trying to lift a door with no spring tension left. Those are separate line items, and we’ll tell you which ones you actually need before any work starts. What keeps it down is a clean, single-spring swap on a door that’s otherwise in good shape.
If you want the full picture of how we approach this repair, from diagnosis to final adjustment, our spring replacement service page walks through the process step by step.
What Affects Spring Replacement Pricing in Lawrence
Lawrence housing stock shapes what we find when we open up a door. A lot of the city’s multifamily homes and older triple-deckers carry garage doors that have been worked on before, sometimes by more than one outfit, and that history shows up in the estimate. Here are the factors that move the number:
- One spring or two. A matched pair runs about twice a single spring. We check the surviving spring’s age and tension before recommending a pair, but on most doors it’s the right call.
- Torsion versus extension. Torsion springs mount on a shaft above the door and extension springs run along the sides. Extension set-ups sometimes need extra safety cables and different hardware, which shifts the line items slightly.
- Cable and drum condition. A spring failure often takes a cable with it. If the cable is frayed or the drum is scored, that’s a cable repair on top of the spring, typically $130 – $250.
- Door weight and size. A wide, heavy two-car door needs springs rated for more cycles. Heavier doors mean beefier springs, and that can nudge the price toward the top of the range.
- Opener strain. A door that’s been lifted with a broken spring for a while burns out opener gears and logic boards. If the motor is struggling, expect an opener repair line item too.
- Access and building type. Property managers with multiple units in one building sometimes have several doors to look at in a single visit, which we can coordinate so each door gets a clear estimate.
Lawrence winters are hard on the moving parts. The freeze-thaw cycle tightens and loosens metal, and the grit that comes with road treatment in the colder months works its way into tracks and rollers. Springs themselves don’t care much about the cold, but the cables and rollers around them do, and a door that’s been binding all winter puts extra load on the spring every time it cycles. If your door has been stiff or noisy for a season, that’s worth a look before a spring gives out at the worst possible moment.
How to Save on Spring Replacement
The best way to keep a spring bill down is to catch the problem early and fix it precisely, not to go looking for the cheapest quote and hope. A few practical habits help:
- Replace the pair, not the single. It sounds like more money up front, but a lone new spring against an old one wears out faster, and you’ll be paying for another visit sooner. Doing both at once is the value play.
- Don’t run the opener on a broken spring. The moment you notice the door won’t stay up or the motor grinds and gives up, stop using it. Every cycle with a dead spring strains the opener and can turn a spring job into a spring-plus-opener job.
- Get the estimate in writing before work starts. Free estimates mean you know the number before anyone touches the door. Call (855) 761-3321 and we’ll quote it upfront.
- Ask for a repair-first diagnosis. We work on the brands you already have, from Craftsman and Genie openers to Clopay and Amarr doors, so a targeted repair is usually the answer. Replacement is a last resort, not a default.
- Bundle related fixes in one visit. If a cable, roller, or track needs attention alongside the spring, handling it in the same appointment saves you a second service call.
We also know that a snapped spring is stressful the moment it happens, usually with a car trapped inside or a door stuck open. That’s why same-day service and fast dispatch from 7am to 7pm matter here. The sooner we get eyes on it, the sooner it’s fixed.
You can see the full range of what we handle, including opener and door repairs alongside spring work, on our Lawrence Garage Door Repair Pros home page.
Why Spring Repair Is a Specialist Job
We want to be direct about this one: a torsion spring under tension holds a dangerous amount of stored energy. When it lets go, it lets go hard and fast, and the cables, drums, and brackets around it move with it. This is not a repair to attempt with a ladder and a pair of winding bars from a video. Trained hands and the right tools are what keep the job safe, and that’s exactly the kind of work we do every day.
Our focus is repair, across the door, the opener, and the spring system, so you’re not calling three different trades to get one door working. We handle LiftMaster, Chamberlain, Genie, Craftsman, Clopay, Amarr, Wayne Dalton, and Raynor equipment, which means whatever is hanging in your garage, we’ve worked on that platform before. Legacy mechanical openers and newer app-connected smart units both get the same treatment: diagnose first, then fix what’s actually broken.
For property managers juggling several garage systems in one building, that single-trade focus pays off. One call covers the doors, the motors, and the springs, with a clear estimate for each unit before anything is approved.
Scheduling Spring Replacement in Lawrence
When a spring breaks, the door usually stops working entirely, and that’s a real disruption to your day. We offer fast dispatch from 7am to 7pm, free estimates, and a satisfaction guarantee on the work. We’re closed on Saturdays, but if a door fails on a Saturday, call and we’ll book you for Sunday. Early mornings and Sundays are there when a weekday doesn’t work.
The local professional who comes out is licensed and insured as Massachusetts requires, and you’ll get a written estimate before any work begins. That estimate is the price. No surprises added on at the end. Call (855) 761-3321 and we’ll get your spring sorted and your door back in service.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Lawrence?
Replacing one spring in Lawrence typically costs $180 – $340, and a matched pair usually runs about twice that because both springs are normally replaced together. Call (855) 761-3321 for an exact quote; estimates are free.
Is it cheaper to repair the spring or replace the whole door?
Repairing the spring is almost always cheaper. A spring job at $180 – $340 per spring is far less than a new door at $700 – $2,200, and a door in decent shape rarely needs replacing just because a spring failed. Our written estimate tells you which is right for your door. Call (855) 761-3321 to find out.
Why does replacing both springs cost about double one spring?
Because a matched pair means two springs at the single-spring price, so the pair runs roughly twice the $180 – $340 range. Springs wear as a set, and pairing a new one with an old one leads to uneven tension and an early failure. Doing both at once is the smarter spend. Call (855) 761-3321 and we’ll confirm what your door needs.
Can you come today if my spring just snapped?
Often yes. We offer same-day service and fast dispatch from 7am to 7pm, and a snapped spring is exactly the kind of call we prioritize. Call (855) 761-3321 and we’ll get you the soonest available estimate.
Does a broken spring always mean extra repairs?
Not always, but often. When a spring snaps, it can take a cable with it ($130 – $250), knock the door off its track ($120 – $240), or strain the opener ($120 – $320). Sometimes it’s a clean spring-only swap at $180 – $340 per spring. We diagnose first and quote each line before work starts. Call (855) 761-3321 for a free estimate.
What brands of springs and doors do you work on in Lawrence?
We repair springs and doors on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Whatever brand is on your door, we’ve worked on that platform. Call (855) 761-3321 to schedule.
Pricing reflects the Lawrence market as of 2026. Lawrence Garage Door Repair Pros offers free estimates – call (855) 761-3321.
Written by the team at Lawrence Garage Door Repair Pros.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Sofia Hernandez"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Erin Schaefer"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Kurt Thompson